Pitney-bowes DM1000 User Manual Page 150

  • Download
  • Add to my manuals
  • Print
  • Page
    / 186
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 149
10 • Troubleshooting
10-6 SV60951 Rev. B
Envelope Feeding Problems
Description Possible Causes Solution
More than one enve-
lope is feeding.
Too many envelopes are on the
fe
ed deck; envelopes are not
stacked properly on the feed deck.
Remove some of the envelope and test
with a smaller stack.
Slant the envelopes slightly
to the left (shin-
gled).
Put thinner envelopes on top of thicker
e
nvelopes in feeder.
Envelopes are too thick/thin for
feed
er adjustment, or thickness
adjustment knob is set improperly.
OR
Thickness adjustment knob is set
too wide
.
Adjust the thickness adjus
tment knob to corre-
spond to the envelope thickness.
For thicker pieces of mail (3/8” to 5/8”), or
m
ail containing several inserts, use the
thick mail setting. For most mail under 3/8",
use the normal mail settings.
For large stacks of thin
mail, such as single
inserts or post cards, the thin mail setting
may be needed for better performance. .
Backstop is too close and is forc-
ing mail into the feeder.
Readjust backstop and restack mail.
Envelopes shingled to the left
Normal Mail Setting
Thick Mail
Setting
Thin Mail
Setting
Page view 149
1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 185 186

Comments to this Manuals

No comments