Pitney-bowes W680 User Manual download pdf (Page 106)

Appendix A • Control Panel Menus

A-24 Pitney Bowes W660/W680 Operator Guide

4. Lines Per

Address

(continued)

5. Communications

Transmitting data from the computer to the W660/W680 is by

way of the parallel interface or the serial interface. The printer

automatically senses the interface through which data is being

sent. When the computer uses the W660/W680’s parallel inter-

face no communication settings are required.

When the serial interface is used, the W660/W680 Communica-

tions menu settings must be configured to match the computer

settings. Configure the computer to use either the XON/XOFF or

DTR handshaking settings to communicate with the W660/

W680. Use the following sub menus to change the W660/W680

serial communications. A. Baud Rate, B Parity, C. Word Length

and D. Line Termination.

2. Press the Enter button to select this option.

3. The LCD displays “LINES/ADDRESS + (MORE) or –

(LESS)”.

The range is from 1 to 66 lines. To select the range, press

the + button (MORE) or – button (LESS). The printer

can print an address which is typically between 3 and 8

lines.

4. Press the Menu button to back out of the menu until the

printer displays OFF LINE. Then, press the On Line

Button to enable the printer.

NOTE: To verify that the computer and the W660/W680 are

communicating, with the printer on-line, type DIR>PRN

and press Enter.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 129 130

No comments

Pitney-bowes W680 User Manual Page 106