Pitney-bowes W680 User Manual download pdf (Page 39)

Pitney Bowes W660/W680 Operator Guide 3-11

W660/W680 Basics • 3

4. Position the Sliding Fence

Setting Up A

Job (continued)

Your printer comes with two sliding fences—a long one and a

short one. Use the long fence for number 10 envelopes and larger

materials. Use the short fence for materials smaller than a num-

ber 10 envelope.

To position the fence:

1. Place a sample piece or trial stack of material in the input

area.

2. Slide the fence until it almost touches the stack of

material.

3. Check that there's about 1/16" clearance (the thickness of

adime) between the fence and the stack.

NOTE: Proper clearance is important. If you push the fence

tight up against the stack, it could retard feeding and cause

jams. If the clearance is too great, pieces could skew as they

feed into the printer.

Sliding Fence

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 129 130

No comments

Pitney-bowes W680 User Manual Page 39