Pitney-bowes W680 User Manual download pdf (Page 44)

3-16 Pitney Bowes W660/W680 Operator Guide

3 • W660/W680 Basics

1. Make sure material is loaded properly. (Or you can use a

single test piece if you'd like to check your setup adjust-

ments.)

2. Turn the printer ON. The On/Off switch is located on the

interface panel at the rear of the machine. Wait for the

printer to finish its startup routine and for the "ON

LINE" screen to appear on the LCD.

3. Press the On Line button on the printer control panel

until the LCD display reads OFF LINE.

4. Press the "Test Env." button. A single envelope will feed

and a sample address should print.

5. Check the print quality. If it's not what you want, adjust

the media thickness lever (page 3-14) as required and run

another test piece by pressing the Test Env. button on the

interface panel at the rear of the machine.

9. Print a Test Piece

Setting Up A

Job (continued)

When you're satisfied with the setup adjustments, you're ready to

run the job. The next chapter explains use of the printer with

your computer.

Test Env.

On Line

Display

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 129 130

No comments

Pitney-bowes W680 User Manual Page 44