Pitney-bowes DM1000 User Manual download pdf (Page 134)

SV60951 Rev. A

9-13

DM1000 Operating Guide

Replacing the

Wiper Blade

Assembly

How To Replace the Wiper Assembly

1. Press the Menu Key.

2. Select Maintenance.

3. Select Replace Wiper Blade

Assembly.

4. Lift up the main cover.

5. Locate the wiper blade assembly in

front of the printhead assembly.

6. Locate the small black lever behind

and next to the wiper assembly.

7. Push the lever to the rear to release

the wiper. Slide the assembly to the

left and lift it out.

8. Remove new wiper blade assembly

from package.

9. Replace the wiper blade by placing

it directly into the wiper blade slot

with the shaft end to the right. Slide

the wiper blade to the right until it

clicks in place.

10. Close the main cover.

Wiper Blade Assembly

Push Lever to Rear To Release

Slide Assembly To the Left

and Lift Out

When you replace the printhead, you must also replace the wiper blade

assembly.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 176 177

No comments

Pitney-bowes DM1000 User Manual Page 134