3-10 Pitney Bowes W660/W680 Operator Guide
3 • W660/W680 Basics
3. Set the Feed Angle
Setting Up A
Job (continued)
The feed angle of the wireframe input stacker depends on the
type of material you're running:
• Heavy material—adjust to a low angle
• Standard material—adjust to the center (45 degree angle)
• Light material—adjust to a high angle
To make the adjustment:
1. Loosen the lock knob on the wireframe slide.
2. Move the wireframe up or down as required.
3. Tighten the lock knob to secure the wireframe.
Lock Knob
Wire Frame
Comments to this Manuals